Automatic switch between connections, based on preference

When having different connection types (e.g. WLAN + 3G), is it possible to instruct iNetFusion to use the WLAN line only when available - and use the 3G when for some reason WLAN is out of reach or not working. But disable use of §G when WLAN is available. That way costs could be saved.



2016/08/02 by Thomas Brustbauer 5 Comments

Comments

  3. Icorway
    2023/03/02 at 07:59:18

    And then somebody else comes along and says oh no no no only half a glass and that small amount that difference yes it can be significant I accept that But and then someone else will come along a week later and say it can be beneficial to have a glass of red wine with a meal buy cialis 5mg daily use< a>

  4. Customer Support
    2016/08/03 at 07:00:42

    Greetings of the day Thomas

    Thank you for showing interest in iNetFusion.

    iNetFusion is a loadbalancer which combines the internet speed from the multiple internet connections on your PC.
    So as per your query when you will have two connections(WLAN+3G) iNetFusion will utilize the bandwidth of both connections to give you faster internet experience. However if one of the connections goes down iNetFusion intelligently uses the one that is still active and directs all your traffic through that internet connection and if the disabled one will resume again(connects again) it will utilize both the connections intelligently.
    iNetFusion s Active Internet Connection Engine intelligently detects the active internet connections utilizes them for faster speed and in cases of failover of some of the internet connections the other active ones are used. So it relieves a user from making the settings again and again and lets them to do their work without being reconfiguring the iNetFusion again.

    The other part of your query was that if there is a way out where you can disable the use of 3G to reduce the cost. This part can be achieved by limiting the usage from that internet connection(3G). If you set the limit of such internet connection your goal of saving the costs can be achieved.
    Steps to Limit the Data Usage from specific internet connection:-
    1) Go to the Internets tab on iNetFusion dashboard. Here iNetFusion will display all the internet connections that are being utilized by iNetFusion(Active internet connections).
    2) Select(or click) the appropriate internet connection where you want to limit the data usage(In your case 3G).
    3) By Clicking more options will reveal which include Infographic(Graphical representation of link speed) and Usage Metering for that particular internet connection.
    4)Set the limit usage in Usage Metering to achieve your goal.
    When that set limit will reach iNetFusion will stop using that internet connection(3G) from utilizing hence you save costs.

    Hope that you have been answered.
    For further queries feel free to get back to us.

    Regards
    iNetFusion Family

  5. Jacques Hamman
    2016/09/23 at 09:06:44

    Hi

    i just need to know. Can you deactivate the Automatic protocol of switching an application to a different connection? For example: Torrents will use wifi only. If wifi goes off the application will wait until the connection is restored?

Leave a Reply